Hammer Strength HD Athletic NX Squat Stand
Hammer Strength HD Athletic NX Squat Stand
Hammer Strength HD Athletic NX Squat Stand
Hammer Strength HD Athletic NX Squat Stand
Hammer Strength HD Athletic NX Squat Stand
Hammer Strength HD Athletic NX Squat Stand
Hammer Strength HD Athletic NX Squat Stand
Hammer Strength HD Athletic NX Squat Stand
  • Load image into Gallery viewer, Hammer Strength HD Athletic NX Squat Stand
  • Load image into Gallery viewer, Hammer Strength HD Athletic NX Squat Stand
  • Load image into Gallery viewer, Hammer Strength HD Athletic NX Squat Stand
  • Load image into Gallery viewer, Hammer Strength HD Athletic NX Squat Stand
  • Load image into Gallery viewer, Hammer Strength HD Athletic NX Squat Stand
  • Load image into Gallery viewer, Hammer Strength HD Athletic NX Squat Stand
  • Load image into Gallery viewer, Hammer Strength HD Athletic NX Squat Stand
  • Load image into Gallery viewer, Hammer Strength HD Athletic NX Squat Stand

Hammer Strength HD Athletic NX Squat Stand

Order From Store

The HD Athletic NX Squat Stand is a low-cost option to create a lifting station with pull ups.  Plate storage is limited.  The Hammer Strength HD Athletic NX Squat Stand is a high-quality, strong and stable stand. The NX line is a range of stands that come in a variety of heights to accommodate any training facility, while providing an affordable alternative without compromising on quality. Perfect for squats.

There are many different configuration options at Hammer Strength. Customize the HD Athletic NX Squat Stand with Monkey Bar, 2-Handle Bar and Offset Bar for the ability to perform multiple pull-up exercises.

Key Features:

  • Different height: 231.14 cm or 218.44 cm.
  • 3" x 3" 11-gauge training uprights with laser cut holes and numbering
  • Monkey Bar pull-up
  • 2 Standard Bar Supports
  • 2 Standard Bar Catches
  • 2—11" Weight Horns

HD Athletic NX Height 

91" (231.14 cm) OR 86" (218.44 cm) Height

Why two different height options?

Each HD Athletic NX Rack training upright can fit in rooms with a standard 8' (2.44 cm) ceiling. Create the perfect combination to match ceiling height limitations and user height requirements.

Features:

  • Different height: 231.14 cm or 218.44 cm.
  • 3" x 3" 11-gauge training uprights with laser cut holes and numbering 
  • Monkey Bar pull-up
  • 2 Standard Bar Supports 
  • 2 Standard Bar Catches 
  • 2—11" Weight Horns

Pull Up Options

2x3 Xmember 

The 2×3 Xmember should be used in facilities that plan to use camera-based training systems.

Compatible with HD Athletic Ball Grips (HDT-BG3)

Offset Bar

Maximises space with the Offset Bar. With two 1.25” textured pull-up bars, this option provides both high and low pulling points with a 9” separation to compensate for lower training uprights.

2-Handle Bar

A Hammer Strength classic, the 2-Handle pull-up bar features 1.25” handles in mixed configurations. This pull-up option features grips on each handle and embodies one of Hammer Strengths true design philosophies: supreme ergonomics

Monkey Bar 

The most traditional of all pull-up bars. The Monkey Bar has high versatility and is the lowest cost option. The bar is 1.25” in diameter and uses a high-wear, textures paint to enhance grip and extend the finish life.

Add-On Options

Standard Hr Bar Catches 

The Standard Half Rack Bar Catches are 18” (46 cm) in length and use a 3-sided urethane guard to shield the catch and the bar. The catch pins easily from the face of the rack and locks in place. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights. ASTM rated to 405 lbs.

Premium Bar Support

The Premium Bar Support is a welded ½” plate protected by an oversized, injection-molded urethane cover for bar protection. The landing area is a 2” resting zone that tapers to 1.5” for wider hand clearance. The finish is a durable high-wear charcoal powder coating with a chrome pin. The interior is wrapped with 3/8” urethane paint guards to prevent any metal-on-metal contact with the rack.

Standard Bar Supports 

The Standard Bar Support is a welded 3/8” plate protected by an injection-molded urethane cover for bar protection. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights. The profile of the landing and resting zone are ASTM and EN compliant.

Specs

Product Name
HD Athletic NX Squat Stand
Category
Racks
Product Code
HDW-SQST
Upright Height
86in (218.44 cm), 91in (231.14 cm)
Pull-up Options
Monkey Bar, Offset Bar, 2-Handle Bar, 2X3 Square
Weight Horns
1 Pair Standard, 1 Pair Long
Bar Catches / Supports
Standard Bar Supports, Premium Bar Supports, Standard HR Bar Catches, Premium HR Bar Catches
Color
Standard, Premium, Custom
double arrow icon

Move or

Haul Away

We'll move your fitness equipment to a new location or dispose of old equipment for you.

Learn More

tools icon

Available

Installation

360 Fitness Superstore offers multiple installation and service options on all our fitness equipment.

Learn More

room planning icon

Home

Gym Design

Design your home or office gym with the Home Gym Design Room Layout Planner!

Learn More

best icon arrow icon

Equipment

Service & Repairs

We offer the best repair service in the San Francisco Bay Area with a 24-hour response time.

Learn More