Hammer Strength HD Athletic NX Half Half Combo Rack

NX Storage Depth 

15” Storage Depth 

15” (38.1 cm) storage depth is best for space constrained weight rooms that can’t bolt down HD Athletic Pro Perimeter.

21” Storage Depth 

21” (53.3 cm) storage depth provides more space between the Training Upright and the Storage Upright, which creates more room for bench depth and spotter access.

HD Athletic NX Height 

91" (231.14 cm) OR 86" (218.44 cm) Height

Why two different height options?

Each HD Athletic NX Rack training upright can fit in rooms with a standard 8' (2.44 cm) ceiling. Create the perfect combination to match ceiling height limitations and user height requirements.

Single Storage

When space is at a premium, choose the single storage for a compact Combo Rack. XL weight horns are recommended for this configuration to allow for enough plate storage for both training stations.

Double Storage

An ideal solution to maximize plate storage with Combo Racks, the Double Storage creates plenty of weight horn capacity to efficiently feed both training stations. Double Storage adds a minimum of 18” (46cm) depth to Combo Racks.

Pull Up Options

Offset Bar

Maximises space with the Offset Bar. With two 1.25” textured pull-up bars, this option provides both high and low pulling points with a 9” separation to compensate for lower training uprights.

2-Handle Bar

A Hammer Strength classic, the 2-Handle pull-up bar features 1.25” handles in mixed configurations. This pull-up option features grips on each handle and embodies one of Hammer Strengths true design philosophies: supreme ergonomics

Monkey Bar 

The most traditional of all pull-up bars. The Monkey Bar has high versatility and is the lowest cost option. The bar is 1.25” in diameter and uses a high-wear, textures paint to enhance grip and extend the finish life.

Storage Add-ons

72" Storage Trays

 Add any 72” Storage Members from HD Athletic to connect your HD Athletic NX Racks. 

Available options include: 

• 2 Pipe for bumper plate and ball storage,
• Accessory Tray for kettle bells and soft accessories,
• Dumbbell Tray, and 
• Stability ball storage 

Hanging Bar Storage 

Hanging Bar Storage holds the barbell by its sleeve and is finished matte charcoal powder coat. This solution can be mounted on any Xmember.

Low Bar Storage 

A convenient, low-profile bar storage solution. Inside the sleeve of each Low Bar Storage is a plastic guard to protect your bar when dropping it into the storage cylinder. The cylinder is angled slightly away from the Rack to ensure the bar can not contact the rack and damage paint.

Add-On Options

72" Rack Connectors

Monkey and Square Rack Connectors attach HD Athletic NX Racks together for more strength training versatility

Nordic Ham

Compatible with all HD Athletic products, the 20" Nordic Ham can be used for exercises like single leg squats and Nordic hamstring curls. The add-on features a chrome pin and paint guards that protect the finish of the upright.

Power Pivot

The Power Pivot provides a rotating mount for a variety of push, pull and rotational barbell exercises.

Band Pegs

The original HD Athletic Band Pegs work perfectly NX Racks as an anchor to mount resistance bands or for band storage.

Premium HR Bar Catches

Premium Half Rack Bar Catches are 22" (56 cm) long and feature a three-sided urethane guard that protects both the catch and the barbell. Two shock absorption pads and vertical displacement brackets prevent damage to the rack. The Premium Catch attaches with a pin through the side of the rack for added strength and stability. The finish is durable high-wear charcoal powder coating with a chrome pin. ASTM rated to 495 lbs.

Standard HR Bar Catches

The Standard Half Rack Bar Catches are 18" (46 cm) in length and use a 3-sided urethane guard to shield the catch and the bar. The catch pins easily from the face of the rack and locks in place. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights. ASTM rated to 405 lbs.

Premium Bar Support

The Premium Bar Support is a welded ½” plate protected by an oversized, injection-molded urethane cover for bar protection. The landing area is a 2” resting zone that tapers to 1.5” for wider hand clearance. The finish is a durable high-wear charcoal powder coating with a chrome pin. The interior is wrapped with 3/8” urethane paint guards to prevent any metal-on-metal contact with the rack.

Standard Bar Supports 

The Standard Bar Support is a welded 3/8” plate protected by an injection-molded urethane cover for bar protection. The charcoal finish is a durable matte powder coating that includes paint guard tape to help protect the training uprights. The profile of the landing and resting zone are ASTM and EN compliant.